 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes RoHs Compliant Features Glass Hermetically Sealed Packages Large Signal Switch Design Available in Low Capacitance Passivated Chip for Low Leakage Current Tape and Reel Packaging Available Fully RoHS Compliant MIL-STD 19500 Screening Available Rev. V6 Glass Package Styles ODS 4, 54 , 139, 146 Description M/A-COM's series of low and medium power glass PIN diodes are specifically designed for use in switches, duplexers, electrically tuned digital filters AGC attenuators, TR switches and RF modulators. They preform particularly well in distortion sensitive environments from HF through S-Band. These hermetically sealed axial leaded PIN diodes are designed for use in the harshest commercial and military applications where their inherent ruggedness makes them an ideal choice. They may ordered screened to meet MIL-STD 19500 requirements. PIN Chip Glass Cylinder Tin Plated Dumet Leads Absolute Maximum Ratings TAMB = +25C (Unless Otherwise Noted) 1 Parameter D.C. Reverse Voltage Operating Temperature Storage Temperature Installation Temperature Absolute Maximum (See Tables) -55C to +175C -55C to +200C +280C for 10 Seconds Design Recommendations The axial leaded, glass, PIN diode series is available in four glass package styles. The ODS 54 is the most suitable to meet low power, low capacitance requirements for high isolation in a series connected switch at VHF frequencies. The ODS 4, 139 and 146 are most suited for moderate power applications requiring low package inductance. Power Dissipation Listed Below Will De-Rate Linearly to 0mW at 175C 250mW without heatsink Case Style 54 @ +25C 500mW without heatsink Case Style 139 @ +25C 1000mW without heatsink Case Style 4 & 146 @ +25C Notes 1. Operation of this device above any one of these parameters may cause permanent damage. 1 M/A-COM's silicon PIN diode chips are also available in a wide variety of alternative package styles besides glass. For case style options, availability and electrical specifications, please refer to the "Packaged PIN Diode Datasheet" located on the M/A-COM website at : www.macom.com/DataSheets/packagedpindiodes.pdf ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes RoHs Compliant Rev. V6 Unless otherwise noted Part Number Unless otherwise noted Max. Series Res. 100MHz RS @ 10mA Nominal Characteristics Carrier 4 Lifetime S I Region Length Mils Package Style 54 54 54 54 54 54 Rev. Volt. VR < 10 A VDC 5 Max. Cap. 1MHz CT @ -50V pF MA47120 1N5719 MA4P203 MA47047 MA47600 MA4P404 35 100 100 200 200 250 Rev. Volt.5 1.00 0.35 1 0.5 1.5 1.5 3.0 6.0 .60 2 2 0.25 0.30 0.30 0.30 3 Part Number MA4PH151 MA47110 MA47123 Package Style 139 139 139 Max. Cap. 1MHz CT @ -50V pF 1.20 0.55 0.50 Max. Cap. 1MHz CT @ -50V pF 1.50 1.10 Max. Cap. 1MHz CT @ -100V pF 0.35 0.50 0.85 0.70 Max. Series Res. 100MHz RS @ 10mA 0.6 6.0 3.0 Max. Series Res. 100MHz RS @ 50mA 0.6 1.0 Max. Series Res. 100MHz RS @ 100mA 0.60 0.45 0.30 0.70 VR < 10 A VDC 100 200 200 Rev. Volt.5 3.0 0.4 1.0 2.0 0.1 0.8 1.0 2.0 2.0 4.0 1.0 1.0 Nominal Characteristics Carrier I Region Lifetime4 Length S Mils Part Number MA47266 MA4PH301 Package Style 146 146 VR < 10 A VDC 200 200 Rev. Volt.5 1.0 0.8 2.0 4.0 1.0 2.0 Nominal Characteristics Carrier I Region Lifetime4 Length S Mils 3.0 3.0 5.0 5.0 Nominal Characteristics Carrier Lifetime4 S 1.0 2.0 3.0 4.0 I Region Length Mils 2.0 2.0 2.0 4.0 Part Number Package Style 4 4 4 4 VR < 10 A VDC 500 500 500 1000 MA4P504 MA4P505 MA4P506 MA4P606 Notes: 1. Tested at VR = 20V. 2. Tested at IF = 50mA. 3. Tested at VR = 10V. 4. Nominal carrier lifetime, TL, specified at IF = + 10mA , IREV = - 6mA. 5. Minimum specified reverse voltage, VR, is sourced and the resultant reverse leakage current, IR, is measured to be <10A. *Specifications subject to change without notice 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes RoHs Compliant Typical RS vs. IF @ TAMB = +25C Rev. V6 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes RoHs Compliant Typical RS vs. IF @ TAMB = +25C Rev. V6 SERIES RESISTANCE Rs (OHMS) FORWARD CURRENT (IF) SERIES RESISTANCE Rs (OHMS) FORWARD CURRENT (IF) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes RoHs Compliant Package Outline Dimensions B C Rev. V6 A D (2 plcs) Package Style 4 54 139 146 Dimension A Mils 265 35 155 10 150 15 220 20 mm 7.33 .89 3.94 .25 3.81 .38 5.59 .51 Dimension B Mils 96 11 71 3 60 10 95 10 mm 2.44 .28 1.8 .08 1.52 .25 2.41 .25 Dimension C Mils 1100 100 1100 100 1100 100 1100 100 mm 27.94 2.54 27.94 2.54 27.94 2.54 27.94 2.54 Dimension D Mils 20 2 15 1 20 3 20 3 mm .51 .05 .38 .03 .51 .08 .51 .08 Assembly Recommendations * Leads on axial leaded devices must be formed while being held firm. Bending the leads too close to the body of the part may cause internal damage to the device. Bends <0.060" from body are not recommended. Appropriate fixturing should be used. * Devices may be soldered using standard 60/40, Sn/Pb or RoHS compliant solders. Axial leads are tin plated, 50M, thick to ensure an optimum connection. * For recommended Sn/Pb and RoHS soldering profiles See Application Note M538 on the M/A-COM website. 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes RoHs Compliant Environmental Ratings Rev. V6 M/A-COM's axially leaded glass PIN diodes are designed to meet most environmental and electrical requirements and may be ordered screened to MIL-STD-19500 as described in the table below. TEST Moisture Resistance High Temperature Storage HTRB Temperature Cycling Shock Vibration Solderability Constant Acceleration Fine Leak Gross Leak METHOD MIL-STD 750 1021 1031 1038 1051 2016 2056 2026 2006 1071 1071 DESCRIPTION/ CONDITIONS 85C, 85% Relative Humidity +175C 80% of rated VR, 50C -65C to +175C, 20 Cycles 500 g's 15 g's IPC/JDEC J-STD-02 20,000 g's H C or E Ordering Information M/A-COM's glass PIN diodes are tape and reeled in 1000 piece quantities. The various base part numbers are only available in the case styles as shown in the tables on page 2. To order, indicate the base part number followed by a dash and the indicated package style. Also add a "T" at the end for tape and reel For example: The MA4P504-4T is the MA4P504 chip in case style 4, tape and reeled. 6 *Specifications subject to change without notice ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MA4PH301
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |